Here are some command line windows tools you can use to get information from HP SIM:
HP Smart Storage:
Display all information on controllers and hard drives (including failure status)
"C:\Program Files\HP\hpssacli\bin\hpssacli.exe" "controller all show config detail"
You will get output similar to:
Smart Array P220i in Slot 0 (Embedded)
Bus Interface: PCI
Slot: 0
Serial Number: PCQVU0BRH3O03H
Cache Serial Number: PBKHV
RAID 6 (ADG) Status: Enabled
Controller Status: OK
Hardware Revision: B
Firmware Version: 6.34
Rebuild Priority: Low
Expand Priority: Medium
Surface Scan Delay: 3 secs
Surface Scan Mode: Idle
Parallel Surface Scan Supported: No
Queue Depth: Automatic
Monitor and Performance Delay: 60 min
Elevator Sort: Enabled
Degraded Performance Optimization: Disabled
Inconsistency Repair Policy: Disabled
Wait for Cache Room: Disabled
Surface Analysis Inconsistency Notification: Disabled
Post Prompt Timeout: 15 secs
Cache Board Present: True
Cache Status: OK
Cache Ratio: 25% Read / 75% Write
Drive Write Cache: Disabled
Total Cache Size: 512 MB
Total Cache Memory Available: 304 MB
No-Battery Write Cache: Disabled
Cache Backup Power Source: Capacitors
Battery/Capacitor Count: 1
Battery/Capacitor Status: OK
SATA NCQ Supported: True
Spare Activation Mode: Activate on physical drive failure (default)
Controller Temperature (C): 47
Cache Module Temperature (C): 0
Capacitor Temperature (C): 11
Number of Ports: 1 Internal only
Driver Name: HpCISSS3.sys
Driver Version: 63.8.0.64
Driver Supports HP SSD Smart Path: True
PCI Address (Domain:Bus:Device.Function): 0000:03:00.0
Host Serial Number: USE249NE6C
Internal Drive Cage at Port 1I, Box 1, OK
Power Supply Status: Not Redundant
Drive Bays: 2
Port: 1I
Box: 1
Location: Internal
Physical Drives
physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS, 300 GB, OK)
physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS, 300 GB, OK)
Array: A
Interface Type: SAS
Unused Space: 0 MB
Status: OK
Array Type: Data
HP SSD Smart Path: disable
Logical Drive: 1
Size: 279.4 GB
Fault Tolerance: 1
Heads: 255
Sectors Per Track: 32
Cylinders: 65535
Strip Size: 256 KB
Full Stripe Size: 256 KB
Status: OK
Caching: Enabled
Unique Identifier: 600508B1001CCF10CA97C0FD1E43EA30
Logical Drive Label: A11A2886PCQVU0BRH3O03HDDF9
Mirror Group 1:
physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS, 300 GB, OK)
Mirror Group 2:
physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS, 300 GB, OK)
Drive Type: Data
LD Acceleration Method: Controller Cache
physicaldrive 1I:1:1
Port: 1I
Box: 1
Bay: 1
Status: OK
Drive Type: Data Drive
Interface Type: SAS
Size: 300 GB
Native Block Size: 512
Rotational Speed: 10000
Firmware Revision: HPD7
Serial Number: 6XP3WC9E0000B302G82N
Model: HP EG0300FBLSE
Current Temperature (C): 20
Maximum Temperature (C): 33
PHY Count: 2
PHY Transfer Rate: 6.0Gbps, Unknown
Drive Authentication Status: OK
Carrier Application Version: 11
Carrier Bootloader Version: 6
physicaldrive 1I:1:2
Port: 1I
Box: 1
Bay: 2
Status: OK
Drive Type: Data Drive
Interface Type: SAS
Size: 300 GB
Native Block Size: 512
Rotational Speed: 10000
Firmware Revision: HPD7
Serial Number: 6XP3WBH20000B2419UW1
Model: HP EG0300FBLSE
Current Temperature (C): 23
Maximum Temperature (C): 33
PHY Count: 2
PHY Transfer Rate: 6.0Gbps, Unknown
Drive Authentication Status: OK
Carrier Application Version: 11
Carrier Bootloader Version: 6
SEP (Vendor ID PMCSIERA, Model SRCv4x6G) 380
Device Number: 380
Firmware Version: RevB
WWID: 5001438023D0BA2F
Vendor ID: PMCSIERA
Model: SRCv4x6G